Hay & Forage Forum banner
1 - 1 of 1 Posts

·
Junior Member
Joined
·
154 Posts
Looks like you are cutting grass hay. Typical recommendation is to cut grass with a 3-5" stubble. (I cut my 1st cutting at 5" stubble.) So consider your mowing height. There may be part of the machine that is pressing down more than it should.

I tend to agree with you that the outside tire is not the culprit. It pretty much looks to be running on the cut stubble.

Perhaps take another hard look at the blade installations on the turtles on each end of the cutter bar. My hunch is maybe one of the blades is not cutting correctly. Not out of the realm of possibility that the guy in the factory putting your machine together was having an off day and put one blade on incorrectly.
 
1 - 1 of 1 Posts
Top