Hay & Forage Forum banner

Torquing the plunger knife nuts

261 Views 11 Replies 7 Participants Last post by  slowzuki
According to my manual, the plunger knife should be torqued to 98 -133 Nm at the three mounting points. However, I can’t see how a torque wrench would fit to torque the uppermost nut to the spec.

Am I missing something? Any tips greatly appreciated.


See less See more
1 - 1 of 12 Posts
Example of double wrenching. Purists will howl that it is abusing the tools; if you have quality tools they will take it no problem. View attachment 93118
Once I was taught that I have used it all the time.
1 - 1 of 12 Posts