Hay & Forage Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
66 Posts
Discussion Starter · #1 ·
Any help you have about the correction of this part failure.
im not able to tell you much more cause the Baler is 50 miles away .
cutter not cutting ?or twine not released . Wound up. out of time !

90973

90975

90974
 

·
Registered
Joined
·
9 Posts
Hard to say but knots hanging on th bill hook usually mean that the stripper arm isn’t wiping the bill hook (hit with hammer until it wipes), your twine knife is dull and should be replaced or sharpened, or your twine tension spring on the twine disc is too loose.
 

·
Registered
Joined
·
66 Posts
Discussion Starter · #3 ·
Hard to say but knots hanging on th bill hook usually mean that the stripper arm isn’t wiping the bill hook (hit with hammer until it wipes), your twine knife is dull and should be replaced or sharpened, or your twine tension spring on the twine disc is too loose.
Thank you very much for the message
 

·
Registered
Joined
·
66 Posts
Discussion Starter · #4 ·
we found that item five is $315 from Argo.
any one had this apart? There’s are spring and a pin should we order them also?
 
1 - 4 of 4 Posts
Top