Hay & Forage Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Having some problems with the knotter on my Massey 12. Everything seems to be working except the knot does not come off and I wind up with double knots on the one side and no tie, the other side is working fine. anybody have something for this. I don't see the problem.
 

·
Super Moderator
Joined
·
15,815 Posts
Sounds as if the wiper arm is not quite wiping the knot off....if you could trip the knotter by hand and have someone turn the flywheel somewhat slowly and watch to see if the wiper arm is leaving the knot on the billhook then you could take a ballpeen hammer and peck gently on the wiper arm to get the wiper everso slightly closer to the billhook. It usually takes just a slight peck or two.

Regards, Mike
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top