Hay & Forage Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
110 Posts
Discussion Starter · #1 ·
Could anyone tell me if a Kubota M7060 would pull a John Deere 467 alright? Found a pretty good deal on one and wanted to make sure it wouldnt be too much for the tractor. Right now I roll about 180 5X5 rolls a year with a Vermeer 505 I
 

·
Registered
Joined
·
5,396 Posts
Welcome to HayTalk
When AC clutch failed on my JD 4255 a couple of yrs ago that I normally pull my JD 467 baler with I then attached baler to my '11 Kubota M7040 which is similar to a M7060. My Kubota M7040 pulled baler fine on virtually flat Texas soil. I make 4X5.5 bales at close to maximum baler hyd pressure @ 5-6 mph depending on roughness of field. I rake three 9 ft swaths of Coastal Bermuda hay which normally yields 2-4 bales per acre. Two 4x5.5 rd bales per acre will be in my dreams with no significant rainfall this hay season.
 

·
Registered
Joined
·
296 Posts
Could anyone tell me if a Kubota M7060 would pull a John Deere 467 alright? Found a pretty good deal on one and wanted to make sure it wouldnt be too much for the tractor. Right now I roll about 180 5X5 rolls a year with a Vermeer 505 I
Sure it will. And if it’s 4wd you should be even less worried.
 
1 - 4 of 4 Posts
Top