Hay & Forage Forum banner
1 - 1 of 24 Posts

· Hay Master
1,804 Posts
That baler is an early 567 and has seen lots of bales. Tension arm springs need replacing, grooves are deep into the twine arms indicative of bale count. Most of the belts are well worn, has the std pickup not the megawide which is a big disappointment in heavy windrows. Front pto shield is missing which usually happens when the cv joint is nearing the end of its life. If it was me i would pass on it, but if it's cheap enough......
1 - 1 of 24 Posts