Search Results for ‘round baler’

A buddy of mine is selling his jd567 baler. He’s a row cropper and ended up with it on a trade deal and is wanting to part with it. Currently I don’t have a bale count or year on it (I’m traveling for work a lot recently) but I have some pics and looked it over. Sprockets and chains have nearly...

One of my winter projects is to replace the pick up teeth on my JD 335 round baler. Never done this before. First thing I need to do is take off the pickup bands. What is the easiest way to access the bolts holding the bands in place? From the front of the baler or through the back with the...

Im brand new to this site, and I really appreciate all the wisdom you guys offer here. This is my first post, I’m wanting to start baling round bales of hay here in Georgia, my son is a fireman and I’m an over the road trucker and wanting to do what I always wanted to bale hay. My son has some...

Selling our trusted New Holland 7060 Silage Special round baler. Here is the info: -Stored under cover -cleaned out each year -greased daily when in use -String tie only -All belt roller bearings have been replaced -Super sweep pick up -Replaced chain tensioners -Has BR2 moisture pads installed...

I have a Welger RP 200 round baler and I am looking for some parts. I can not find any dealers that deal with welger parts. Does anyone know where I can find parts in the USA? we are located in Southern Wisconsin. Thanks in advance!

Bought a used case ih 8435 silage special round baler, was wondering if anyone has one that could help us find parts? Seems no one has any? Also does this baler have a Heston or new holland baler that parts can interchange with?

Hi all I am new to this site and to baling hay. I've recently purchased small farm that has some of the land in hay already and I've decided to try putting up hay myself for our livestock and hopefully some to sell. If all goes well... or even just OK I will look into seeding more acres. One...

I am looking for a good used tractor with a loader to use primarily for haying, ie, pull the disc mower, round baler, and to load hay. May use it to pull a disc and cultapacker about once every 5 years or so to replant the alfalfa fields. Just looking for something reliable and simple to...

Currently I have a Kr260 Krone round baler I got cheap, net wrap. It works good but makes soft core bales and I would like something a little more reliable. I found a 1745 Massey for 12k and a New Holland BR750 for 13k, why is the massey cheaper when its newer? 1000 bales on the massey, 5000 on...

I purchased a used string New Holland BR770A baler a few years back. It has auto wrap and command box with it. I have found that each bale the auto wrap does something different. It may wrap string every few minutes, it may go into auto wrap mode and never shut off, it may not trip at all...

Ok I need some help from the electronic farmers. I bought a case/ih 8450 round baler and am wanting to hook up the bale monitor. It only has 2 wires, a positive and neg. How can I tell which is which. The two wires are the red and gray/black coming in from the black round thing at the top of the...

Last week I decided that I was having too many problems with my 10 year old New Holland round balers, considering how much we have yet to bale this season. Called two local dealers for prices and bought 2 new New Holland Roll-Belt 560 Specialty Crop balers from one of them. They were delivered...

I have an older New Holland BR7060 Crop Cutter Round Baler. The 2M Wide Pickup frame around the feed augers seem to have a large gap and plugs up easily in moist hay. Dry hay does not have a problem, but wet hay get wrapped around the augers. I suspect it is due to this large gap. I have looked...

I have a Sperry New Holland 846 chain baler. I am issues with the gate closing completely. I adjusted the cable tension on both sides. Needless to say this worked for one bale. While attempt to correct this issue one of the cables snapped. I will be replacing the cable. So I am needing to bits...

Hello Everyone, I am in need of advice, We currently own a JD 447 (4x4) Rd. Baler with a silage kit installed and are generally satisfied with the performance but we need more capacity and we will soon be selling it and need opinions on what would be the best possible choice in a 4x5...

I am looking for the fastest way to get the tensioning rolls out and replace the bearing.

I just acquired a 8450 round baler which is the same as a Hesston 550. I got the belts relaced and in the process noticed something with the guides on the front lower belt roller (see photo). There's 2 guides on this roller. One of them is welded to the roller. The second spins free and there's...

Hello, We've owned a NH 7060 Silage Special for a couple years now (and had a NH 644 for several years before that), and I'm thinking about installing an expeller roll. I ended up buying the kit from the dealer, but after reading through the included directions I still have a few questions...

First post on the forum but I've been on here reading stuff for awhile. I've searched this topic, but can't find anything current as most of the posts I find are 5-6 years old. I'm looking at upgrading my hay equipment. I've got a 60 acre coastal field in Granbury, TX and mainly bale hay for...

My computer says the door is open when it is not. someone told me to move the sensor that connects with the door but how do I find the sensor?