Hay & Forage Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 79 Results
  1. Machinery
    Just bought a new to me new Holland 848 baler, twine, auto wrap. When looking over the machine everything looked good till I got it home and got up on one of the tires and looked down into the chamber. I could see that both sides of the apron chain were folded on top of each other like the...
  2. Machinery
    An implement dealer I deal with in my day job has a nh660, twine only, auto wrap that I am thinking about getting. I was wondering about everyone’s opinions on those model balers since I know little to nothing about them. What should I be looking at? What are some common problems? Thanks in...
  3. Machinery
    Having issues with my 650 twine. Seem's like everything works as it should EXCEPT for the auto extend and retract. I can manually control it and it ties great, just annoying and seriously messing with my limited sandwich eating time. Any idea why it might not be working. I have tried switching...
  4. Machinery
    popped a shear bolt and had to stop baling. Found a bunch of spaghetti in the knotter. Found that the rising lever which ‘counts the bales’ and tells the knotter to knot had come unbolted. After cutting all the twine mess out and checking the timing it looks ok, however… now the clutch will not...
  5. Machinery
    I am in the process of trying to sell my New Holland BR7060. I was asked by someone yesterday if the controller, the Bale Command Plus, is considered waterproof or water resistant. I have always had it mounted inside of a cab tractor so it is not a question I have ever asked or thought of. I...
  6. Machinery
    Hoping I can get an answer here as the internet has not been helpful. I'm trying to replace the knife drive pulley. It's the top pulley that the belt runs on for the wobble box. Ours for some reason split in two. From the way it sits it appears the gearbox needs to come off? Or does the pulley...
  7. Tractor Talk
    Hi all, Hoping that someone out there might be able to help me figure out what's wrong with my tractor. I have a TN65 that lost all hydraulic power. No power to the FEL, the remote hydraulic, or the lift arms. The issue is intermittent - occasionally it will work, then I don't have anything for...
  8. Machinery
    I have a new to me new Holland 853 baler. Works great only issue is the arms wont snap shut to cut the twine. I can bump it manually and it will close. I've cleaned them out and lubed them up and still nothing. any help would be appreciated.
  9. Tractor Talk
    Im looking at a Ford New Holland 7740 SLE that the PTO is not working on. Was told that the switch was replaced and worked for a little bit, but the next day it wouldnt come on. Sounds like electrical to me, but wanted to hear other opinions and experiences. I may be wrong, but from what I...
  10. Tractor Talk
    Hey guys, have a tractor that ac works perfectly when running around the yard and light duty. Hook my baler on and sometimes will get 2 hours sometimes only 20 minutes until compressor kicks out. Usually can just shut of fan and turn back on and it will kick in again. Have had it into a shop...
  11. Machinery
    hello, my little family farm recently got a New Holland 1112 swather, overall the swather is in remarkable shape. however, it likes to wrap taller, viney grasses (vetch, Johnson grass, Sudan grass) around the auger, I have replaced the 2 rubber bats with genuine New Holland bats with no...
  12. Machinery
    Hey there all! Just starting a philosophical thread. I've got a New Holland model 70 bale thrower (hydraulic drive - bought it used, so unsure of the year, but still had almost all of its paint when I got it. Actually have it on a Massey 124 baler now, but that's a different story.) I know...
  13. Baler sunset

    Allis 6080 and New Holland BR7070 Baler at sunset
  14. Machinery
    Hello - Father's Day crashed yesterday when the twine arms of my NH 678 got out of sync. Turns out I have no manual to refer to and could not work it out today. Cannot reset them without the diagrams to figure out what went wrong. Any help would be appreciated.
  15. Machinery
    Hello. I'm new to baling and i bought my own baler (NH 366 - for Europe). Today was the first day of baling. For first time baler gone good. But i have one other problems with twine is everywhere around on the field, on the bale,... It is always about 30 mm long. The problems is viewed on the...
  16. Machinery
    I have 1 owner, barn kept, excellent condition, hay equipment for sale. I moved to grain farming several years ago.I planned to sell at auction but auctions have been cancelled due to the COVID19 pandemic. Does anyone have any experience with online auctions? If not, which online marketplace...
  17. Machinery
    I just purchased a BR7090 baler. I made 90 bales flawlessly to start the season, then had the net wrap get caught in the PTO shaft, between the clutch and the gear box... after spending about an hour or more cutting that off and cleaning that up, I tightened the brake on the net wrap. I made...
  18. Machinery
    Last year we got a BC5070. In light dry hay I have a problem with the adjustments on the bales. I have used a JD348 for years with little or no problems. The NH has 3 on the top and 3 on the bottom of the feeding fingers rod. Is it that hard. We use another 5070 with bale skiis. I have used it...
  19. Machinery
    I purchased a used string New Holland BR770A baler a few years back. It has auto wrap and command box with it. I have found that each bale the auto wrap does something different. It may wrap string every few minutes, it may go into auto wrap mode and never shut off, it may not trip at all...
  20. Machinery
    So I recently purchased a new holland 1495 self propelled haybine. I am trying to figure out how to haul it. It is about 120 miles north of me. The machine is 10ft 10 inches wide at the front tires. around 15ft wide at the ends of the head. the rear tires can be narrowed up to 7 1/2 ft. I’m...
1-20 of 79 Results
Top