Hay & Forage Forum banner

machinery

  1. Machinery
    I have a 5425 and a 5075E cab JD. How do I get to the inside cab air filters to clean and/or change them without damaging the plastic?
  2. Machinery
    Anyone familiar with the lifting and lowering operation of the kuhn 6002 rotary rake ? The front rake portion will not completely finish tilling all the way forwards when lowering Raise operation appears to work normal.
  3. Machinery
    I have a John Deere 530 baler and fluid is leaking from the top of one of the gate lift cylinders. It is to the point now that the gate latches won't operate correctly and I have to lift and drop the gate quickly several times and hold my tongue just right to get the gate to latch again. I...
  4. Machinery
    My 1120 needs new bearings in the swaybar. Does anyone know if the swaybar has to be completely removed from the machine or do they come out from the front. Also, is anyone aware of a service manual for this machine? Thanks
  5. Machinery
    Hi all, I have a Deere 567 baker with the mega tooth pickup. I know a gentleman who would sell me a megawide pickup off a 568 baler that burned up. I would like to put the megawide pickup under my 567, as it has a lot of life in it yet. Is this possible ? Any input/experience doing this would...
  6. Machinery
    I bought a hesston sh10 can anybody tell me the height and width of it.
  7. Machinery
    What or why not? What did you like about it or not like about it? Would you recommend it?
  8. Machinery
    If you wouldn't mind, could you respond either to this post or just take the poll online? http://www.progressiveforage.com/news/poll (Located on right side of page...scroll down a bit) You guys are a great resource and I appreciate your help. Lynn
  9. Machinery
    I have bought a Krone 130S round baler but it is not sending signals from the control box to the sensors when plugged into my tractor. Does the control box have to be re-programmed or is there any solution to this? Any help would be greatly appreciated Paddy
  10. Machinery
    I am trying to find instructions on how it remove conditioner rollers on a john deere 896 windrower any help would be great
  11. Machinery
    I am having some trouble with my Class Markant 55 baler. The twine doesnt appear to be knotting from one side. Any idea what the problem could be?
  12. Machinery
    The bolt that secures the pivot tongue to the main frame came loose. This allowed the tongue to slide up on the pivot point ( three inch vertical round stock) about five inches. It appears slightly off axis not allowing it to return to normal operating position. How do I get back? Thanks in...
  13. Machinery
    Anybody looking at buying any new machinery or "new" Used Machinery this winter in preparation for next year? I sold my old Allis Chalmers 7030 to get something that is a better fit for my use. It really was too big, although it was cheap good running horsepower. Looking hard at either a Case...
  14. Machinery
    Seeing a lot more small farm auctions here in central Indiana than we have in the past few years. Thinking land prices and input costs are making up the minds of a lot of the small few hundred acre farmers. Also many other are nearing retirement and the land sales makes for a nice retirement...
Top