Hay & Forage Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Tractor Talk
    Got an issue with the old 885. Tractor runs great and everything works fine for the first hour/hour and a half or so. After that when everything is hot the steering starts getting real hard and the remotes start acting sluggish. Runs that way until I let it cool down. Note: This is only...
  2. Machinery
    Wondering if anyone has thoughts on how to eliminate foam from hydraulic systems. I have a Case 580B Loader/Backhoe that's got a bad foaming problem . I've rebuilt several cylinders but don't want to wrap up the job until I can clean the system. I believe I owe my foaming problem to several...
  3. Tractor Talk
    This tractor has worked well until the last couple years. I spent 8k to have Knoxland fix it( bought it from them in 2005) but they don't seem to be able to get it running right. When I start it up with a Kuhn 243 mower on it the pto shaft jumps back and forth sideways. And it screams. They...
  4. Machinery
    I bought a JD 2270 pretty cheap, knowing the header would not raise or lower. What might be the problem? I loosened one of the hoses on the controller and the header fell the rest of the way down to the ground. So, it was holding, it just won't move. Hydraulic fluid was pretty low when I...
  5. Machinery
    Has anyone converted the old Hesston balers to have on-board hydraulics to run the tension system? I'd like to take the hydraulics off the tractor system and put it on the baler like all the newer models, I'm just not sure if this is feasible and/or how to go about doing it. The baler already...
1-5 of 5 Results
Top