Hay & Forage Forum banner
haybine
1-11 of 11 Results
  1. Machinery
    I have a NH 489 haybine that I have been going over, greasing and checking gear oil. I have two issues with this machine; I understand that the rollers should not touch, but have around a 1/2 inch space. After crawling under it to look at the rollers I see that right side has the space but the...
  2. Machinery
    I am looking at a 467 the only issue is the bottom roller has started to peel apart. Does any one have a line on a good used one or pair? Also, has any one ever had a set of rollers recovered? Just wondering what it might cost.
  3. Machinery
    I can't seem to find this information for my NH 488 haybine The head drops to the ground even when in transport mode. I goes up okay when I use the hydraulic cylinder. What holds the head up? What should I be looking at to see if it is broken or damaged?
  4. Machinery
    So I recently purchased a new holland 1495 self propelled haybine. I am trying to figure out how to haul it. It is about 120 miles north of me. The machine is 10ft 10 inches wide at the front tires. around 15ft wide at the ends of the head. the rear tires can be narrowed up to 7 1/2 ft. I’m...
  5. Machinery
    I recently bought a New Holland 479 haybine. Tonight I attempted to get it from transport poistion to cutting position. The pin pulls out and the arm swung about one to two inches at the pivot and then got stuck. Can't get it to move either direction. Tried backing up and going foward, both with...
  6. Machinery
    Greetings! Last hay season I had a lot of trouble with my IH1590 swather/mower clogging up during cutting. Hay is 70/30 OG/Alfalfa and very tall again this year. I am working on the 1590 trying to figure out if it's possible to operate it with the rollers separated in order to let the hay just...
  7. Machinery
    What do you guys think about a New Holland H7460 Discbine thanks
  8. Machinery
    How well does a nh 472 haybine work? Does it speed drying time up enough to justify the extra cost? This summer will be my first time baling my own hay and I acquired one so I was wanting to now if I need to sell it and buy a cutter and rake or use it? I will be baling 35 acres only. As of...
  9. Machinery
    I'm forsure that this topic has been posted many times before, but Im intersted in purchasing a set of rolls for my haybine. What are your thoughts / expericance with either the Circle C or the B&D Rollers? I would lile to hear the good, the bad, and the Ugly. This will be going on a John Deere...
  10. Machinery
    Good day from South Africa. What is the difference between a John Deere 1209 and a 1219 mower conditioner? I know the 1219 is the newer model. Is there anything to look out for when buying one. Any tips for operation? Any comments in general on the above models will be appreciated. We are...
  11. Machinery
    Greetingsfrom South Africa. I need some advice on mower conditioners. We do a little custom mowing and we currently have a MF 925 MOCO that we use. We want to upgrade and we have a option of buying a Kuhn 352 moco or Krone 323 moco. Both of the mowers has work to be done on them. The Krone has...
1-11 of 11 Results
Top