Featured Product: Hay Moisture Tester - HT-PRO™ Portable -

Jump to content





× Sponsors



Recent Topics

BR 740 bale density problem

Machinery Today, 06:33 AM
I had a leak on my density cylinder so pulled and rebuilt. We hooked hose and filed system by cycling cylinder 20 times, pressure gauge worked when raised up to about 2800psi. Baler won’t roll tight bales now and pressure gauge doesn’t read more than about 250 anytime during baling. Baler is fair...
Full topic ›

rear mounted disc mower/conditioner

The HayTalk Learning Center Today, 06:17 AM
we are looking to purchase a discbine or a one 3 pt mounted disc mower with conditioner, not enough horse power to run the triple mower set up only have 80hp.  i know krone makes one and NH JD and others.  was wondering if anyone runs a rear mounted disc mower/conditioner and if you do...
Full topic ›

Sicklepod in millet hay?

Alfalfa/Hay Today, 06:17 AM
I am cutting my millet hay and it has some sicklepod in it. Can i feed this to cows?
Full topic ›

Bayer Proposal

Weed and Pest Management Today, 06:12 AM
Settlement proposal by Bayer which mainly covers the "Roundup" chemical lawsuits (present and future) along with two other chemical suits to end the "distraction".   Regards, Mike   https://www.agweb.co...emical-lawsuits
Full topic ›

BR7060 bale size calibration

Machinery Today, 05:53 AM
Good morning. Could someone give me instructions on how to do the bale size calibration for a BR 7060 with the bale command plus controller? I had to replace the bale size pot yesterday. I have the manual, but from reviewing posts in the forums, it seems there may be some differences on how to do...
Full topic ›


Search Articles


- - - - -

Featured Product: Hay Moisture Tester - HT-PRO™ Portable


Featured Product: Hay Moisture Tester - HT-PRO™ Portable

The HT-PRO™ Portable Hay Moisture Tester with Calibration Clip comes in 2 sizes:
  • 20 inch Probe - Part No. 07120
  • 10 inch Probe - Part No. 07121
http://www.balesuppl...alibration-clip

What are the Key Features:
  • This originally was the first and only hay moisture tester to include a calibration clip that was portable.
  • Has a 10 inch and 20 inch probe length option.
  • Above and below moisture limit indicator
  • Backlit LED display for operation in low light situations.

The Specifications:
  • Moisture range is: 8% to 45% depending on the type of hay tested
  • Temperature range: 32° to 225°F (0° to 107°C)
  • Accurate throughout the normal range of stored, baled alfalfa, timothy and clover hay
  • Display resolution: 0.1% moisture
  • 9V battery is required

Possible Accessories:
  • HT-PRO™ Calibration Clip - Part No. 07156

http://www.balesupply.com/


0 Comments

Latest Gallery Images