Featured Product: Hay Moisture Tester - HT-PRO™ Portable -

Jump to content





× Sponsors



Recent Topics

Alliance Radial tires?

Tractor Talk Today, 06:09 AM
Anyone have experience with the alliance radials? Need to replace the fronts on a Kubota M7040.  Everyone says to go to radials over the bias, about $75 more per tire.  the only radials that seem to be available right now are the Alliance and Ceat.  Any thoughts?
Full topic ›

New Holland 630

Machinery Today, 05:44 AM
Good morning all ,   Looking for opinions : I now have a case 8420 round baler , it does a good job but would like a little heavier tighter bale .  considering a New Holland 630 round baler . would this baler make a better , heavier tighter bale ?   Thanks in advance 
Full topic ›

Do I need An LLC?

Alfalfa/Hay Yesterday, 08:58 PM
This is a loaded question so bear with me. I’ve baled hay for the past 5-6 seasons and am getting to a point that some equipment upgrades could help/are needed. I put up between 6-8k small squares a year and would like to grow it to 10-12k as time goes along. Vegetables are our primary sour...
Full topic ›

Dry Granular Applicator mounting on New Holland BR740 Baler

Machinery Yesterday, 05:58 PM
Has anyone mounted a gandy style granular applicator on a new holland br740 or similar baler? There is lots of room to mount it above the net wrap box, but I am unsure where I would route the drop hoses since the netwrap will be in the way. I thought about mounting it on the hitch and dropping th...
Full topic ›

Drago Corn Heads

Machinery Yesterday, 03:42 PM
Just watched a movie about the Drago cornheads and I was very impressed, this company makes Star Trek a reality! If any of you are using them, are they as good as portrayed? Beam Me Up Scotty!
Full topic ›


Search Articles


- - - - -

Featured Product: Hay Moisture Tester - HT-PRO™ Portable


Featured Product: Hay Moisture Tester - HT-PRO™ Portable

The HT-PRO™ Portable Hay Moisture Tester with Calibration Clip comes in 2 sizes:
  • 20 inch Probe - Part No. 07120
  • 10 inch Probe - Part No. 07121
http://www.balesuppl...alibration-clip

What are the Key Features:
  • This originally was the first and only hay moisture tester to include a calibration clip that was portable.
  • Has a 10 inch and 20 inch probe length option.
  • Above and below moisture limit indicator
  • Backlit LED display for operation in low light situations.

The Specifications:
  • Moisture range is: 8% to 45% depending on the type of hay tested
  • Temperature range: 32° to 225°F (0° to 107°C)
  • Accurate throughout the normal range of stored, baled alfalfa, timothy and clover hay
  • Display resolution: 0.1% moisture
  • 9V battery is required

Possible Accessories:
  • HT-PRO™ Calibration Clip - Part No. 07156

http://www.balesupply.com/


0 Comments

Latest Gallery Images