Looking for a Kuhn parts rake, had a tree fall on ours in the fall. Basket is good, but the under carnage “u” is bent as well as the middle section and some arms.
Would rather try to fix this one than scrap it, and use it as a second back up.
OR. If some one is looking for this unit for parts might be able to sell this unit.
Our location is Vermont so shipping is of course an obstacle. Willing to truck something if it’s a day away.
Safest regards,
Thanks as always
Michael
Kuhn 4120 parts rake
Started by
DSLinc1017
, Feb 20 2021 12:17 PM
8 replies to this topic
#1
DSLinc1017
-
- Members
- 1002 posts
Hay Hoser
- LocationChamplain Valley, Vermont
Posted 20 February 2021 - 12:17 PM
#2
slowzuki
-
- Members
- 5656 posts
Senior Member
- LocationNear Fredericton, New Brunswick, Canada
Posted 20 February 2021 - 04:46 PM
Maybe in southern Quebec?
- DSLinc1017 likes this
#3
DSLinc1017
-
- Members
- 1002 posts
Hay Hoser
- LocationChamplain Valley, Vermont
Posted 20 February 2021 - 06:35 PM
Maybe in southern Quebec?
I have not searched that way yet, thanks good idea! I'm sure there are plenty of them around with bad basket bearings. Ours is good in that regard.
Safest regards,
#4
DSLinc1017
-
- Members
- 1002 posts
Hay Hoser
- LocationChamplain Valley, Vermont
Posted 20 February 2021 - 06:37 PM
Maybe in southern Quebec?
Purchased our new Pottenger rake from a place on PEI, Great dealer, good people!
#5
DSLinc1017
-
- Members
- 1002 posts
Hay Hoser
- LocationChamplain Valley, Vermont
Posted 08 March 2021 - 10:44 AM
Gave up on finding a parts unit.
Now its up to some one else!
https://vermont.crai...7287748080.html
#6
slowzuki
-
- Members
- 5656 posts
Senior Member
- LocationNear Fredericton, New Brunswick, Canada
Posted 08 March 2021 - 10:58 AM
I'm guessing from the New Holland / Kubota dealer? I have had parts sent to be from there as well. Good pottinger dealer in St Cesair Quebec too, fellow speaks English quite well.
Purchased our new Pottenger rake from a place on PEI, Great dealer, good people!
- DSLinc1017 likes this
#7
DSLinc1017
-
- Members
- 1002 posts
Hay Hoser
- LocationChamplain Valley, Vermont
Posted 08 March 2021 - 07:25 PM
SOLD!!
#8
paoutdoorsman
-
- Members
- 1409 posts
Hay Something
- LocationSouth Central PA
Posted 10 March 2021 - 06:34 AM
That was a quick sale. Congrats! Which Pottinger did you get?
#9
DSLinc1017
-
- Members
- 1002 posts
Hay Hoser
- LocationChamplain Valley, Vermont
Posted 13 March 2021 - 06:54 PM
That was a quick sale. Congrats! Which Pottinger did you get?
Rake sold for 1,500 it needed a lot of TLC. If I had a decent garage with the right metal working set up. I could have made it go. On the flip side it was nice to see it leave with out the needed time of making it work.
Purchased a slightly used Pottinger 691A. Exited to cut out raking time down a bit.
However I am a bit concerned on some of our smaller fields. I’m still on the lookout for a single rotary rake. I really did like Kuhn 4120. It was also a Right hand delivery. The 691 is Left hand... it will het some getting used too. I’m sure I’ll have some rollabar habits left.
If anyone does have a a single rake the wish to part with close to the North East give a holler.
Michael
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
