8240 Ford PTO. - Tractor Talk - HayTalk - Hay & Forage Community

Jump to content




Photo

8240 Ford PTO.


  • Please log in to reply
2 replies to this topic

#1 TJ Hendren

TJ Hendren

    Advanced Member

  • Members
  • 380 posts
  • LocationN.E. Okla

Posted 20 February 2021 - 12:17 PM

Here is the story. The PTO will start and run and pull the required load, however once it heats up and i shut it off it won't restart unless i shut the tractor down and let it cool off for 30 minutes to an hour depending on the ambient air temp. After that it will start and run fine until i shut it down again. Any ideas? 



#2 Hogfarmer10

Hogfarmer10

    Newbie

  • Members
  • 9 posts
  • LocationTennessee

Posted 20 February 2021 - 12:27 PM

This is just a thought but my guess would be the hydraulic pump that supplies pressure to the pto is either getting worn or has a small leak on the intake side. It sounds like with the cooler, thicker oil, it primes up and works fine, however when the oil is warmer and thinner, the pump cannot prime itself/ get started. Again, this is just a guess, as I am more familiar with the older fords. I’d be sure to get a gauge and check the pressure at cold and operating temperatures. Good luck

#3 slowzuki

slowzuki

    Senior Member

  • Members
  • 5638 posts
  • LocationNear Fredericton, New Brunswick, Canada

Posted 20 February 2021 - 04:30 PM

SLE has a ccls hydraulic system - can need help tripping into pumping in some situations




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

× Sponsors