6 replies to this topic

[B.hecker]

 Hi guys,

 

 I'm new here. Been on here awhile reading but finally time to post!  So we are looking at buying a used 5060-5070 baler and we are trying to figure out how to transport it a few hundred miles back to Missouri safely. I have a 102 inch wide gooseneck but the specs say the baler is 120 inches wide. I had thought about jacking it up and removing the large wheel and tire on the chamber side and blocking it up chaining it down like that. Anyone done this before?

[paoutdoorsman]

I've done it a couple of times.  Let me see if I can find my pics/posts relating to it.

 

Edit:  Found it, here you go:  https://www.haytalk....mber/?p=1005202

 

Welcome to HayTalk by the way!  Let me know if you have any more questions.

[B.hecker]

Thank you!! that is almost exactly what we had in mind. The pics and info are much appreciated.

[broadriverhay]

Nice trailer paoutdoorsman. Two things that will always show, money and a pregnant woman!!!

[Ox76]

Welcome to haytalk

[paoutdoorsman]

Nice trailer paoutdoorsman. Two things that will always show, money and a pregnant woman!!!

 

Borrowed that trailer for the 102" deck width.  It is a nice one.  Rough pulling son of a gun though ever since he put the all steel radials on it.

[broadriverhay]

Haha , yeah my gooseneck has 16 ply tires on it. It is kinda rough when empty but pulls great with a load.