I had a bolt sheer on the belt tension roller inside the baler and I'm wondering how you get to the ends to work on it. There are access holes at the top but it doesn't look like the roller with line up with any of them. I have the parts to fix it but unsure of how to get the roller off.
Remove roller from a Vermeer 605F
Posted 01 July 2020 - 12:09 PM
Well you have to get the belt/tension off the roller in question. If it is like an I baler there are two roller on the tension arm inside the baler. Set the baler under something you can use to strap up and support a roller. Raise the tailgate and strap/chain the other roller. Lower the tailgate and the belts should go slack. Then you can remove/repair they roller.
***Don't forget to put the safety stops on the tailgate cylinders.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users