If you do not see the indexed list of posts and links in this first post, click SEE MORE at the bottom of this first post.
Welcome to my thread on New Holland equipment repair and other information you may find of some use.
If you have any questions, comments, or suggestions, please start a new thread on the machinery forum or PM me. This will make it easier for visitors to find the information they are looking for. Please, do not post questions here or in the following posts.
I have worked on New Holland equipment for 50 years. With retirement beckoning in the near future my goal by starting this thread was to share some of the knowledge I gained over the years. I have seen many an experienced technician retire and their knowledge lost.
As you scroll down this first post you will find a table of contents with links to each post on this thread.
The following posts reflect how I work and the process I am comfortable with. My way of doing things is not the only way. Regardless of how you choose to work on your equipment, always practice safety first. Wear safety glasses, ear protection and any other safety equipment that is required to do a job safely. Read your operators manuals and follow the recommended procedures for safely working around the piece of equipment. In many of my posts on the round balers you will see the tailgate open. Always lock your tailgate before entering an open bale chamber.
I have posts on tools I have made to make a job easier. You are free to copy those tools, but only for your personal use.
Mike
Table of Contents
Round Baler
BR and Prior New Holland Belt Balers
Roll Service
Take-up arm roll service 4x6 & 5x6 Balers .
Take Up arm roll R&R 4x5 & 5x5 Balers
Take Up Arm Roll Service 4x5 & 5x5 Balers Update https://www.haytalk.com/attachments/repairing-take-up-arm-rolls-on-five-foot-tall-balers-pdf.92527/
Sledge frame and roll service
BR Stationary Roll Repair
600 Series 5 x 6 Round Baler Belt Drive Roll Service
Removing Top Tailgate Rolls
Overheating of the Stationary Roll on 700 Series BR Balers
Replacing the Sledge Roll Idler on a BR or Roll Belt Baler
Auto-Wrap and Twine Systems
Auto-Wrap Does not Trip or Trips Late
Auto-Wrap Trips but the Tying Process Does Not Start
Auto Wrap Recycling
Twine does not Cut
Update Twine does not Cut 9 16 2017
Twine Tubes do not Return
Timing the AutoWrap System
https://www.haytalk.com/attachments/timing-the-autowrap-system-pdf.92745/
Net Systems
Net not Cutting or Cutting Cleanly
600 Balers
600 Balers Update 8 13 2017
BR Balers
BR Actuator Stalling
Removing Net Spreader Roll from 600 Series Balers
Insufficient Net Coverage on BR and Roll Belt Balers
Sharpening Net Knives
Troubleshooting Flow Chart for BR Net Error Message
Changing the Profile of the Duckbill Net Knife Activation Slot
https://www.haytalk.com/attachments/changing-duckill-knife-activation-slot-pdf.90943/
Belts
Belt Tracking
Preparing Round Baler Belts for Lacing
Pickups
Chain on Left Side of Wide Pickup Comes Off
Removing Wide Pickup From 5X6 BR Baler
BR 2.0 Wide Pickup with Center Support Bearing Repair
Pickup Removal
Disassemble Stuffer
Preparing Stuffer for Assembly
Install the Stuffer
Electrical Diagrams
6?0 Round Balers
6?0 Full Bale Alarm
6?4 and 6?8 Balers Bale Command Plus
BR Round Balers Bale Command Plus
BR Full Bale Alarm With Bale Shape
BR Full Bale Alarm Without Bale Shape
850 Electric Tie Wiring Diagram
Roll Belt 450 550 560 Connector and Terminal Locations
https://www.haytalk.com/attachments/roll-belt-connector-location-and-pin-outs-2-pdf.93359/
Troubleshooting
BR Baler Starts Wrapping at any Bale Size
Bale Shape Indicator Bars do not Go to Bottom of the Scale after Ejecting a Bale
BR Baler Operator Panel Will Not Turn On or Alarm Sounds Continuously and No Buttons Function
General Information
Follower Roll Scraper Modifications
BR Baler Preparation
External Alarm for Roll Belt Baler
Roll Belt Balers
Wrapping Systems
Fault Codes
Strange Problems with Net System
Net will not start/shreds
Chain Balers
Repairing bale Air Tension System
Small Square Baler
Hay dog service
Knotter Repair Part 1
Knotter Repair Part 2
Knotter Problems
Twine Comes Out of Needle Eye
Replacing the Pickup Drive Belt 565, 570, 575
Replacing the Knife Arm Roller Retained by Peening
Adjusting Plunger and Knives 500 and BC Series Balers
Small Baler Slip Clutch Specs
Discbine
Constant Velocity Driveline and Repair
Removing, Disassembly, Assembly, and Installation of a Discbine Cutter Bar
Part 1
Part 2
Repairing a Disc Cutter Bar Module
Disassembly
Assembly
1411, 1412, H7230, H7330 Bevel Gearbox Failures
1411, 1412, H7230, H7330 Bevel Gearbox Repair
Separating the Cutterbar Where the Drive Shaft is Stuck in the Pinions
Repairing the Discbine Roll Drive Gearbox
Removing Cutter Bar Drive Shaft from 9 and 10 foot Discbines
Replacing Left Lower Roll Bearing on 9 ft and 10 ft Discbines
https://www.haytalk.com/attachments...l-bearing-on-9-and-10-ft-discbines-pdf.91578/
Weasler Brand Over Running Clutch Repair
Disc Mower
Hooking up a Disc Mower
Hooking up a 3pt Hitch Disc Mower Update
Sickle Bar Mower
Replacing Outer Shoe Ledger Plate
Rakes
Roll-a-Bar Gearbox Repair
Tools I have made
273 and 310 Feeder Bushing Removal Tool
Hay Dog Spring Installation Tool
Round Baler Roll Bearing Removal Tool
Stub Guard Alignment Tool
Standard Guard Alignment Tool
https://www.haytalk.com/attachments/haybine-guard-straightening-tool-pdf.92255/
Skid Loader
Skid loader will not Start
Starting Circuit Wiring Schematics
LX and Early LS Models with Metal Instrument Panels
Late LS Models with Plastic Instrument Panels and LS.B Models
Early L100 Models with Rectangular Work Lights
Cab Upgrade L100 with Vertical Work Lights
Wiring Schematics
L200 Air Conditioner Wiring Schematic
Injection Pump Timing
Timing a LS180, LS190 for Injection Pump Removal
Grinder Mixer
New Holland Grinder Mixer Information
How I ......
Remove Sprockets and Pulleys from Tapered Shafts
General Information
Slip Clutch Maintenance
Sealed Bearings with Locking Collars
Constant Velocity Driveline and Repair
Replacing Shafts in Metric Drivelines
Welcome to my thread on New Holland equipment repair and other information you may find of some use.
If you have any questions, comments, or suggestions, please start a new thread on the machinery forum or PM me. This will make it easier for visitors to find the information they are looking for. Please, do not post questions here or in the following posts.
I have worked on New Holland equipment for 50 years. With retirement beckoning in the near future my goal by starting this thread was to share some of the knowledge I gained over the years. I have seen many an experienced technician retire and their knowledge lost.
As you scroll down this first post you will find a table of contents with links to each post on this thread.
The following posts reflect how I work and the process I am comfortable with. My way of doing things is not the only way. Regardless of how you choose to work on your equipment, always practice safety first. Wear safety glasses, ear protection and any other safety equipment that is required to do a job safely. Read your operators manuals and follow the recommended procedures for safely working around the piece of equipment. In many of my posts on the round balers you will see the tailgate open. Always lock your tailgate before entering an open bale chamber.
I have posts on tools I have made to make a job easier. You are free to copy those tools, but only for your personal use.
Mike
Table of Contents
Round Baler
BR and Prior New Holland Belt Balers
Roll Service
Take-up arm roll service 4x6 & 5x6 Balers .
Take Up arm roll R&R 4x5 & 5x5 Balers
Take Up Arm Roll Service 4x5 & 5x5 Balers Update https://www.haytalk.com/attachments/repairing-take-up-arm-rolls-on-five-foot-tall-balers-pdf.92527/
Sledge frame and roll service
BR Stationary Roll Repair
600 Series 5 x 6 Round Baler Belt Drive Roll Service
Removing Top Tailgate Rolls
Overheating of the Stationary Roll on 700 Series BR Balers
Replacing the Sledge Roll Idler on a BR or Roll Belt Baler
Auto-Wrap and Twine Systems
Auto-Wrap Does not Trip or Trips Late
Auto-Wrap Trips but the Tying Process Does Not Start
Auto Wrap Recycling
Twine does not Cut
Update Twine does not Cut 9 16 2017
Twine Tubes do not Return
Timing the AutoWrap System
https://www.haytalk.com/attachments/timing-the-autowrap-system-pdf.92745/
Net Systems
Net not Cutting or Cutting Cleanly
600 Balers
600 Balers Update 8 13 2017
BR Balers
BR Actuator Stalling
Removing Net Spreader Roll from 600 Series Balers
Insufficient Net Coverage on BR and Roll Belt Balers
Sharpening Net Knives
Troubleshooting Flow Chart for BR Net Error Message
Changing the Profile of the Duckbill Net Knife Activation Slot
https://www.haytalk.com/attachments/changing-duckill-knife-activation-slot-pdf.90943/
Belts
Belt Tracking
Preparing Round Baler Belts for Lacing
Pickups
Chain on Left Side of Wide Pickup Comes Off
Removing Wide Pickup From 5X6 BR Baler
BR 2.0 Wide Pickup with Center Support Bearing Repair
Pickup Removal
Disassemble Stuffer
Preparing Stuffer for Assembly
Install the Stuffer
Electrical Diagrams
6?0 Round Balers
6?0 Full Bale Alarm
6?4 and 6?8 Balers Bale Command Plus
BR Round Balers Bale Command Plus
BR Full Bale Alarm With Bale Shape
BR Full Bale Alarm Without Bale Shape
850 Electric Tie Wiring Diagram
Roll Belt 450 550 560 Connector and Terminal Locations
https://www.haytalk.com/attachments/roll-belt-connector-location-and-pin-outs-2-pdf.93359/
Troubleshooting
BR Baler Starts Wrapping at any Bale Size
Bale Shape Indicator Bars do not Go to Bottom of the Scale after Ejecting a Bale
BR Baler Operator Panel Will Not Turn On or Alarm Sounds Continuously and No Buttons Function
General Information
Follower Roll Scraper Modifications
BR Baler Preparation
External Alarm for Roll Belt Baler
Roll Belt Balers
Wrapping Systems
Fault Codes
Strange Problems with Net System
Net will not start/shreds
Chain Balers
Repairing bale Air Tension System
Small Square Baler
Hay dog service
Knotter Repair Part 1
Knotter Repair Part 2
Knotter Problems
Twine Comes Out of Needle Eye
Replacing the Pickup Drive Belt 565, 570, 575
Replacing the Knife Arm Roller Retained by Peening
Adjusting Plunger and Knives 500 and BC Series Balers
Small Baler Slip Clutch Specs
Discbine
Constant Velocity Driveline and Repair
Removing, Disassembly, Assembly, and Installation of a Discbine Cutter Bar
Part 1
Part 2
Repairing a Disc Cutter Bar Module
Disassembly
Assembly
1411, 1412, H7230, H7330 Bevel Gearbox Failures
1411, 1412, H7230, H7330 Bevel Gearbox Repair
Separating the Cutterbar Where the Drive Shaft is Stuck in the Pinions
Repairing the Discbine Roll Drive Gearbox
Removing Cutter Bar Drive Shaft from 9 and 10 foot Discbines
Replacing Left Lower Roll Bearing on 9 ft and 10 ft Discbines
https://www.haytalk.com/attachments...l-bearing-on-9-and-10-ft-discbines-pdf.91578/
Weasler Brand Over Running Clutch Repair
Disc Mower
Hooking up a Disc Mower
Hooking up a 3pt Hitch Disc Mower Update
Sickle Bar Mower
Replacing Outer Shoe Ledger Plate
Rakes
Roll-a-Bar Gearbox Repair
Tools I have made
273 and 310 Feeder Bushing Removal Tool
Hay Dog Spring Installation Tool
Round Baler Roll Bearing Removal Tool
Stub Guard Alignment Tool
Standard Guard Alignment Tool
https://www.haytalk.com/attachments/haybine-guard-straightening-tool-pdf.92255/
Skid Loader
Skid loader will not Start
Starting Circuit Wiring Schematics
LX and Early LS Models with Metal Instrument Panels
Late LS Models with Plastic Instrument Panels and LS.B Models
Early L100 Models with Rectangular Work Lights
Cab Upgrade L100 with Vertical Work Lights
Wiring Schematics
L200 Air Conditioner Wiring Schematic
Injection Pump Timing
Timing a LS180, LS190 for Injection Pump Removal
Grinder Mixer
New Holland Grinder Mixer Information
How I ......
Remove Sprockets and Pulleys from Tapered Shafts
General Information
Slip Clutch Maintenance
Sealed Bearings with Locking Collars
Constant Velocity Driveline and Repair
Replacing Shafts in Metric Drivelines