My NH Repair Procedures, Tips and Tricks - Machinery - HayTalk - Hay & Forage Community

Jump to content




Photo
* * * * - 7 votes

My NH Repair Procedures, Tips and Tricks

New Holland

  • Please log in to reply
66 replies to this topic

#1 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 05 September 2016 - 11:20 PM

Welcome to my thread on New Holland equipment repair and other information you may find of some use. 

 

If you have any questions, comments, or suggestions, please start a new thread on the machinery forum or PM me.  This will make it easier for visitors to find the information they are looking for. Please, do not post questions here or in the following threads.

 

I have worked on New Holland equipment for over 46 years.   My goal by starting this thread was to share some of the knowledge I gained over the years.  I have seen many an experienced technician retire and their knowledge lost.

 

The posts will not follow any particular order.  As you scroll down this first post you will find a table of contents with links to each post on this thread.

 

My way of doing things is not the only way.  Regardless of how you choose to work on your equipment, always practice safety first.  Wear safety glasses, ear protection and any other safety equipment that is required to do a job safely.  In many of my posts on the round balers you will see the tailgate open.  Always lock your tailgate before entering an open bale chamber.

 

I have posts on tools I have made to make a job easier.  You are free to copy those tools, but only for your personal use.

 

Mike

 

Table of Contents

 

 

 

Round Baler

 

BR and Prior Belt Balers

 

Roll Service

 

Take-up arm roll service 4x6 & 5x6 Balers .  https://www.haytalk....attach_id=33249

 

Take Up arm roll R&R 4x5 & 5x5 Balers  https://www.haytalk....attach_id=83286

 

Sledge frame and roll service  https://www.haytalk....attach_id=33121

 

BR Stationary Roll Repair  https://www.haytalk....attach_id=45410

 

600 Series 5 x 6 Round Baler Belt Drive Roll Service  https://www.haytalk....attach_id=48930

 

Removing Top Tailgate Rolls  https://www.haytalk....attach_id=61154

Overheating of the Stationary Roll on 700 Series BR Balers  https://www.haytalk....attach_id=76664

 

 

Auto-Wrap and Twine Systems

 

Auto-Wrap Does not Trip or Trips Late  https://www.haytalk....attach_id=62962

 

Auto-Wrap Trips but the Tying Process Does Not Start  https://www.haytalk....attach_id=81066

 

Auto Wrap Recycling   https://www.haytalk....attach_id=33682

 

Twine does not Cut  https://www.haytalk....attach_id=58898

Update Twine does not Cut 9 16 2017  https://www.haytalk....attach_id=61146

 

Twine Tubes do not Return  https://www.haytalk....attach_id=55562

 

 

Net Systems

 

Net not Cutting or Cutting Cleanly

     600 Balers  https://www.haytalk....attach_id=34465

     600 Balers Update 8 13 2017  https://www.haytalk....attach_id=58642

     BR Balers  https://www.haytalk....attach_id=83176

 

BR Actuator Stalling  https://www.haytalk....attach_id=35241

 

Removing Net Spreader Roll from 600 Series Balers  https://www.haytalk....attach_id=51370

 

Insufficient Net Coverage on BR and Roll Belt Balers  https://www.haytalk....attach_id=56994

 

Sharpening Net Knives  https://www.haytalk....attach_id=81420

 

Troubleshooting the BR Baler Series Net Errors  

https://www.haytalk....attach_id=86414

 

 

Belts

 

Belt Tracking  https://www.haytalk....attach_id=35137

 

Preparing Round Baler Belts for Lacing  https://www.haytalk....attach_id=47377

 

 

Pickups

 

Chain on Left Side of Wide Pickup Comes Off  https://www.haytalk....attach_id=57202

 

Removing Wide Pickup From 5X6 BR Baler  https://www.haytalk....attach_id=58466

 

BR 2.0 Wide Pickup with Center Support Bearing Repair

  Pickup Removal  https://www.haytalk....attach_id=80290

  Disassemble Stuffer  https://www.haytalk....attach_id=80292

  Preparing Stuffer for Assembly  https://www.haytalk....attach_id=80294

  Install the Stuffer  https://www.haytalk....attach_id=80296

 

Electrical Diagrams

 

6?0 Round Balers  https://www.haytalk....attach_id=36697

       6?0 Full Bale Alarm  https://www.haytalk....attach_id=36809

 

6?4 and 6?8 Balers  https://www.haytalk....attach_id=36729

 

BR Round Balers Bale Command Plus  https://www.haytalk....attach_id=54281

      BR Full Bale Alarm With Bale Shape  https://www.haytalk....attach_id=37673

      BR Full Bale Alarm Without Bale Shape  https://www.haytalk....attach_id=38329

 

 

Troubleshooting

 

BR Baler Starts Wrapping at any Bale Size  https://www.haytalk....attach_id=81328

 

Bale Shape Indicator Bars do not Go to Bottom of the Scale after Ejecting a Bale  https://www.haytalk....attach_id=81506

 

BR Baler Operator Panel Will Not Turn On or Alarm Sounds Continuously and No Buttons Function  https://www.haytalk....attach_id=85516

 

General Information

 

Follower Roll Scraper Modifications  https://www.haytalk....attach_id=39794

 

BR Baler Preparation  https://www.haytalk....attach_id=45906

 

External Alarm for Roll Belt Baler  https://www.haytalk....attach_id=56410

 

 

 

 

 

Roll Belt Balers

 

Wrapping Systems

 

Fault Codes  https://www.haytalk....attach_id=82560

 

 

 

 

Small Square Baler

 

Hay dog service  https://www.haytalk....attach_id=33457

 

Knotter Repair Part 1  https://www.haytalk....attach_id=34218

 

Knotter Repair Part 2   https://www.haytalk....attach_id=34689

 

Knotter Problems

   Twine Comes Out of Needle Eye  https://www.haytalk....attach_id=41113

 

Replacing the Pickup Drive Belt 565, 570, 575 

https://www.haytalk....attach_id=69193

 

Replacing the Knife Arm Roller Retained by Peening  https://www.haytalk....attach_id=74138

 

Adjusting Plunger and Knives 500 and BC Series Balers  https://www.haytalk....attach_id=75098

 

 

Discbine

 

Constant Velocity Driveline and Repair  https://www.haytalk....attach_id=47009

 

Repairing a Disc Cutter Bar Module

                Disassembly  https://www.haytalk....attach_id=52890

                Assembly       https://www.haytalk....attach_id=52898

 

1411, 1412, H7230, H7330 Bevel Gearbox Failures  https://www.haytalk....attach_id=60146

 

1411, 1412, H7230, H7330 Bevel Gearbox Repair  https://www.haytalk....attach_id=60786

 

Separating the Cutterbar Where the Drive Shaft is Stuck in the Pinions  https://www.haytalk....attach_id=70353

 

Repairing the Discbine Roll Drive Gearbox  https://www.haytalk....attach_id=73138

 

Removing Cutter Bar Drive Shaft from 9 and 10 foot Discbines  https://www.haytalk....attach_id=84308

 

 

Disc Mower

 

Hooking up a Disc Mower  https://www.haytalk....attach_id=34737

 

Hooking up a 3pt Hitch Disc Mower Update  https://www.haytalk....attach_id=51378

 

 

 

Sickle Bar Mower

 

Replacing Outer Shoe Ledger Plate  https://www.haytalk....attach_id=62138

 

 

 

Rakes

 

Roll-a-Bar Gearbox Repair  https://www.haytalk....attach_id=54745

 

 

 

Tools I have made

 

273 and 310 Feeder Bushing Removal Tool  https://www.haytalk....attach_id=38321

 

Hay Dog Spring Installation Tool  https://www.haytalk....attach_id=38874

 

Round Baler Roll Bearing Removal Tool  https://www.haytalk....attach_id=40129

 

Stub Guard Alignment Tool  https://www.haytalk....attach_id=42497

 

 

 

Skid Loader

 

Skid loader will not Start  https://www.haytalk....attach_id=53729

 

Starting Circuit Wiring Schematics

 

             LX and Early LS Models with Metal Instrument Panels  https://www.haytalk....attach_id=54553  

             Late LS Models with Plastic Instrument Panels and LS.B Models  https://www.haytalk....attach_id=54754

             Early L100 Models with Rectangular Work Lights  https://www.haytalk....attach_id=55162

             Cab Upgrade L100 with Vertical Work Lights  https://www.haytalk....attach_id=79532

 

Wiring Schematics

             L200 Air Conditioner Wiring Schematic  https://www.haytalk....attach_id=86502

 

Timing a LS180, LS190 for Injection Pump Removal  https://www.haytalk....attach_id=63914

 

 

 

Grinder Mixer

         

             New Holland Grinder Mixer Information  https://www.haytalk....attach_id=65306

 

 

 

How I ......

 

Remove Sprockets and Pulleys from Tapered Shafts  https://www.haytalk....attach_id=43762

 

 

 

General Information

 

Slip Clutch Maintenance  https://www.haytalk....attach_id=35537

     Small Square Baler https://www.haytalk....attach_id=35545

 

Sealed Bearings with Locking Collars  https://www.haytalk....attach_id=55178

 

Constant Velocity Driveline and Repair  https://www.haytalk....attach_id=47009

 

Replacing Shafts in Metric Drivelines  https://www.haytalk....attach_id=64186

Attached Files


  • Vol, DSLinc1017, nhbaler282 and 26 others like this

#2 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 08 September 2016 - 08:28 PM

Sledge roll and sledge roll service

 

For an index with links of all the repair procedures in this thread, go to post #1

Attached Files


  • LukeS, swalker269, Ox76 and 1 other like this

#3 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 13 September 2016 - 08:45 PM

Hay dog and hay dog spring service

 

For an index with links of all the repair procedures in this thread, go to post #1

 

Attached File  Hay Dogs 09112016.pdf   1.29MB   518 downloads


  • Hayguy, DSLinc1017, stack em up and 3 others like this

#4 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 16 September 2016 - 08:46 PM

Auto Wrap Recycling

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

Attached File  Auto Wrap Recycling 9162016.pdf   1.1MB   236 downloads


  • deadmoose, LukeS, swalker269 and 1 other like this

#5 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 23 September 2016 - 10:32 PM

Knotter Repair Part 1

 

 

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

Attached File  Knotter Repair Part 1 9232016.pdf   3.37MB   548 downloads


  • Hayguy, stack em up, Hoghart and 2 others like this

#6 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 24 September 2016 - 09:40 PM

Knotter Repair Part 2

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

Attached File  Knotter Repair Part 2 10022016.pdf   2.69MB   315 downloads


  • stack em up, Hoghart and Ox76 like this

#7 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 28 September 2016 - 09:01 PM

Net not Cutting 6XX Balers

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

Attached File  Net not Cutting 92816.pdf   2.39MB   144 downloads

 

 

Update 8 13 2017  Attached File  Net Failed to Cut or Net is cut Ragged 1.pdf   1.3MB   90 downloads


  • swalker269 and Ox76 like this

#8 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 02 October 2016 - 11:31 AM

Net Actuator Stalling

 

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

 

Attached File  BR Baler Net Actuator Stalling 10102016.pdf   4.75MB   205 downloads


  • Ox76 likes this

#9 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 02 October 2016 - 05:04 PM

Net not Cutting BR Balers

 

 

Index for all repair procedures in this forum thread.  https://www.haytalk....ips-and-tricks/

 

 

Attached File  Net Not Cutting BR Baler.pdf   1.63MB   61 downloads


  • Ox76 likes this

#10 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 02 October 2016 - 06:03 PM

Hooking up a Disc Mower

 

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

 

Attached File  Hooking up a Disc Mower 10022016.pdf   161.71KB   147 downloads

 

Attached File  Hooking UP a 3pt Hitch Disc Mower 5 27 2017.pdf   492.47KB   100 downloads

 

 


  • Halle and Ox76 like this

#11 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 08 October 2016 - 08:11 PM

Belt Tracking

 

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

 

Attached File  Belt Tracking 10082016.pdf   609.95KB   235 downloads


  • lcjaynes, swalker269 and Ox76 like this

#12 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 15 October 2016 - 08:25 PM

Slip Clutch Maintenance

 

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

 

Attached File  Slip Clutch 10152016.pdf   797.06KB   175 downloads


  • lcjaynes and Ox76 like this

#13 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 15 October 2016 - 10:42 PM

Small Square Baler Slip Clutch Specs

 

 

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

 

Attached File  Sqaure Baler Slip Clutch Specs 10152016.pdf   82.35KB   194 downloads


  • lcjaynes and Ox76 like this

#14 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 04 November 2016 - 09:36 PM

Round Baler Wiring Schematic

 

 

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

 

Attached File  6X0 Electrical Schematic.pdf   1.58MB   84 downloads

 

Attached File  6X0 Full Bale Electrical Schematic.pdf   994.05KB   60 downloads

 

Attached File  6X4 and 6X8 Bale Command Plus Electrical Schematic.pdf   3.8MB   77 downloads

 

Attached File  BR Bale Command 6 22 17.pdf   1.78MB   126 downloads

 

Attached File  BR Full Bale Alarm with Bale Shape.pdf   239.75KB   60 downloads

 

Attached File  BR Full Bale Alarm Without Bale Shape 12042016.pdf   214.98KB   27 downloads


  • Redbaler, swalker269 and Ox76 like this

#15 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 04 December 2016 - 05:12 PM

273 and 310 Feeder carriage bushing removal tool

 

 

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

 

Attached File  Carriage Bushing Removal Tool 12042016.pdf   1020.15KB   80 downloads


  • Ox76 likes this

#16 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 19 December 2016 - 10:32 PM

Hay Dog Spring Installation Tool

 

 

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

 

Attached File  Hay Dog Spring Installaion Tool 12 19 2016.pdf   15.95MB   148 downloads


  • Ox76 likes this

#17 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 08 January 2017 - 12:12 PM

Follower Roll Scraper Modifications

 

 

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

 

Attached File  Follower Roll Scraper Modifications 1 8 2017.pdf   745.96KB   188 downloads


  • lcjaynes, swalker269 and Ox76 like this

#18 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 15 January 2017 - 07:22 PM

Round Baler Belt Roll Bearing Removal Tool

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

 

 

 

Attached File  Belt Roll Bearing Puller 1 15 2017.pdf   833.42KB   166 downloads


  • swalker269 and Ox76 like this

#19 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 25 January 2017 - 11:28 PM

Twine Comes Out of Needle Eye

 

 

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

 

Attached File  Twine Comes Out of the Eye of the Needle 1 25 2017.pdf   10.4MB   272 downloads


  • Edd in KY, lcjaynes and Ox76 like this

#20 mike10

mike10

    Senior Member

  • Members
  • 2398 posts
  • LocationSouthern Indiana

Posted 07 February 2017 - 08:48 PM

Stub Guard Alignment Tool

 

 

 

Index for all repair procedures in this forum thread.  http://www.haytalk.c...ips-and-tricks/

 

 

Attached File  Stub Guard Alignment Tool 2 6 2017.pdf   10.54MB   113 downloads


  • lcjaynes and Ox76 like this





Also tagged with one or more of these keywords: New Holland

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

× Sponsors