Best used small sq baler for under 20K
Blaze 57 - Today, 12:18 PM
Type of conditioning, Impeller or rolls ??
longmeadow farm - Today, 08:48 AM
Vol - Today, 08:13 AM
Minerals and other supplements
C & C Cattle and Hay - Today, 12:43 AM
Funny stuff, restores my faith in humanity.....
somedevildawg - Yesterday, 11:29 PM
575 new holland problem
Posted 14 July 2012 - 01:45 AM
Looking it over the 1/2 bolt with the grease zerk in it that goes into the clutch houseing came loose and it popped right out. So we went to the new holland dealer bought the new bolt and put it back together and made sure everything was right.
after about 20 bales going slowly it popped right out again. I have never had this problem with this baler before. Anybody ever have this happen?? I am thinking to put it back in with loctite.
Posted 14 July 2012 - 03:41 AM
Posted 14 July 2012 - 05:15 AM
Posted 14 July 2012 - 10:14 AM
Posted 15 July 2012 - 07:24 AM
Posted 15 July 2012 - 09:01 AM
Yes new bolt and the two washers. I have the proper override on the clutch and everything runs smooth no jerking or anything on the pto shaft. Put it together one more time and if it doesnt stay in I guess its replace the clutch pilot. Examined it inside threads appear good with no dammage.
Did you also re-install the two flat washers along with the Bolt?
Posted 15 July 2012 - 05:54 PM
Posted 15 July 2012 - 07:34 PM
I hit mine with the loctite too only because the parts guy at new holland told me the threads get stressed on these and he would use the loctite when putting it together.
I hit mine with a heavy dose of lock-tite, seemed to work.
I didnt think it was a good idea the first time but since it might be the clutch pilot that is bad its a way cheaper fix if it works.
Guess we will see if that stuff lives upto its name.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users